1982 Pontiac Phoenix Review
1982 Pontiac Phoenix is a Hatchback 4-dr style car .Made in United States, 1982 Pontiac Phoenix has 2 trims priced by the manufacturer at 0 with just total of 3 recalls in the past 1982 Pontiac Phoenix. It’s seating No data people with 4 doors and a rank size of No data gallon. The engine is 2.8L V6 OHV 12V .
Vin Numbers
- 1G2AY68X4CT112678
Safety & Recalls
Recall 82V021000 started on /Date(384411600000-0500)/.
Summary: UNDER CERTAAIN CONDITIONS, THE HOSE CLAMPS ON THE FUEL TANK FILLER PIPE AND FUEL TANK FILLER VENT PIPE COULD FRACTURE. THE FRACTURE OF THESE CLAMPS COULD CAUSE FUEL LEAKAGE AT ANY OF THE FOUR PIPE TO HOSE CONNECTIONS. LEAKAGE CAN OCCUR DURING REFUELING, OR WHILE DRIVING, IF THE FUEL TANK IS ABOVE 3/4 FULL.
Consequence: Not Defined
Remedy: DEALER WILL INSPECT AND REPLACE THE HOSE CLAMPS ON THE FUEL TANK FILLER PIPE AND VENT PIPE AT NO COST TO OWNER.
Recall 82V018000 started on /Date(383893200000-0500)/.
Summary: THE CLUTCH CABLE MAY RUB AGAINST THE MASTER CYLINDER BRAKE PIPE WHEN THE CLUTCH PEDAL IS OPERATED. CONTINUED OPERATION OF THE VEHICLE MAY RESULT IN WEAR THROUGH OF THE INSULATION ON THE CLUTCH CABLE. THE RESULTING METAL ON METAL CONTACT COULD LEAD TO FAILURE OF THE BRAKE PIPE, LOSS OF BRAKE FLUID, AND PARTIAL LOSS OF BRAKE ACTION.
Consequence: Not Defined
Remedy: DEALER WILL INSPECT AND, IF NECESSARY, CORRECT SYSTEM BY PROVIDING A MINIMUM 1/2 INCH CLEARANCE BETWEEN CLUTCH CABLE AND BRAKE PIPE TO AVOID METAL ON METAL CONTACT.
Recall 83V007000 started on /Date(410245200000-0500)/.
Summary: REAR BRAKE HOSES MAY HAVE BEEN MANUFACTURED INCORRECTLY WHEN THE METAL END FITTINGS WERE INSTALLED. SOME REAR BRAKE HOSES MAY SEPARATE FROM THE METAL END FITTINGS WHEN SUBJECTED TO THE PULLING FORCE SPECIFIED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD 106, "BRAKE HOSES".
Consequence: Not Defined
Remedy: THE DEALER WILL INSPECT AND REPLACE, IF NECESSARY, THE REAR BRAKE HOSES AT NO CHARGE TO OWNERS.