1985 Porsche 944 Review
1985 Porsche 944 is a Coupe 2-dr style car .Made in Germany, 1985 Porsche 944 has 1 trim priced by the manufacturer at 0 with just total of 3 recalls in the past 1985 Porsche 944. It’s seating No data people with doors and a rank size of No data gallon. The engine is 2.5L L4 SOHC 8V .
Porsche 944 1985 Trims
Vin Numbers
- WP0AA0940FN451979
- WP0AA0942FN454205
- WP0AA0949FN470143
- WP0AA0947FN471758
- WP0AA0941FN453319
- WP0AA0940FN452193
- WP0AA0948FN457917
- WP0AA0943FN476066
- WP0AA094XFN475058
- WP0AA094XFN451133
- WP0AA0948FN458713
- WP0AA0944FN454741
- WP0AA0944FN475685
- WP0AA0947FN474692
- WP0AA094XFN472841
- WP0AA0942FN456178
- WP0AA0947FN471680
- WP0AA0946FN475459
- WP0AA094XFN472385
- WP0AA0946FN452439
- WP0AA0945FN457891
- WP0AA0944FN473838
- WP0AA0947FN450196
- WP0AA0943FN474754
- WP0AA0949FN452726
- WP0AA0947FN458590
- WP0AA0940FN456924
- WP0AA0941FN475451
- WP0AA0940FN450573
- WP0AA0944FN471099
- WP0AA0942FN472106
- WP0AA0949FN474970
- WP0AA0943FN455587
- WP0AA0944FN471328
- WP0AA0946FN455096
- WP0AA0941FN452509
- WP0AA0940FN472489
- WP0AA0947FN472229
- WP0AA0942FN451935
- WP0AA094XFN457305
- WP0AA0940FN454395
- WP0AA0947FN458203
- WP0AA0944FN456831
- WP0AA094XFN457532
- WP0AA0941FN473635
- WP0AA0944FN452326
- WP0AA0946FN476093
- WP0AA094XFN471043
- WP0AA0947FN458539
- WP0AA0940FN470662
- WP0AA0940FN471956
- WP0AA0947FN473154
- WP0AA0940FN472542
- WP0AA0946FN454465
- WP0AA0941FN457760
Safety & Recalls
Recall 85V039000 started on /Date(481867200000-0400)/.
Summary: FUEL HOSE MAY BE DAMAGED DUE TO TOO MUCH PRESSURE IN CRIMPING THE HOSE END FITTING. CONSEQUENCE OF DEFECT: A FUEL LEAK COULD DEVELOP WHICH COULD CAUSE A LOSS IN SYSTEM PRESSURE AND ENGINE STALLING. ALSO, FUEL VAPORS IN THE ENGINE COMPARTMENT COULD BE IGNITED BY A SPARK AND CAUSE A FIRE.
Consequence: Not Defined
Remedy: HOSES WILL BE MODIFIED BY CUTTING OFF THE CRIMPED END FITTING AND REPLACING IT WITH A NIPPLE FITTING SECURED WITH A SCREW TIGHTENED CLAMP.
Recall 85V023000 started on /Date(478501200000-0500)/.
Summary: METAL BUSHINGS FOR THE CRUISE CONTROL LINKAGE ARE SUBJECT TO CORROSION DUE TO WEATHER CONDITIONS. ALSO, THERE IS NOT ENOUGH CLEARANCE BETWEEN THE BUSHINGS AND THE SHAFT; AND THE LINKAGE POINTS WERE NOT LUBRICATED. THUS, CRUISE CONTROL LINKAGE CAN BIND, CAUSING THE ACCELERATOR PEDAL TO STICK IN A DEPRESSED POSITION. CONSEQUENCE OF DEFECT: THE VEHICLE, WITHOUT WARNING, WOULD CONTINUE AT SET SPEED AND CAN'T BE REDUCED. THIS COULD RESULT IN LOSS OF CONTROL AND AN ACCIDENT.
Consequence: Not Defined
Remedy: REPLACE THE METAL BUSHINGS WITH THE PLASTIC VERSION.
Recall 90V061000 started on /Date(639028800000-0400)/.
Summary: THE HOSE MATERIAL USED IN THE SHORT SECTION OF THE HIGH PRESSURE FUEL LINE HOSE, BETWEEN THE FUEL RAIL AND FUEL PRESSURE REGULATOR, IS SUBJECT TO HARDENING, AND COULD CAUSE FUEL LEAKS BETWEEN THE HOSE AND THE METAL PIPE FITTINGS.
Consequence: FUEL LEAKS COULD IGNITE ON THE HOT EXHAUST SYSTEM, OR ANY OTHER SOURCE OF IGNITION, RESULTING IN AN ENGINE COMPARTMENT FIRE.
Remedy: REPLACE FUEL LINE HOSE WITH HOSES MADE OF IMPROVED MATERIAL.
FAQ
Porsche All models of 1985
Porsche 911
Porsche 928
