1990 Dodge Dynasty Review
1990 Dodge Dynasty is a Sedan 4-dr style car measuring 192.00 in length and 53.30 in height. Made in United States, 1990 Dodge Dynasty has 2 trims priced by the manufacturer at 13,836 with just total of 5 recalls in the past 1990 Dodge Dynasty. It’s seating 6 people with 4 doors and a rank size of 16.00 gallon. The engine is 3.0L V6 SOHC 12V and uses 22 of gasoline in the city and 22 on highways.
Vin Numbers
- 1B3XC4630LD753394
- 1B3XC4631LD777445
- 1B3XC4631LD798411
- 1B3XC4635LD775875
- 1B3XC4635LD793650
- 1B3XC4636LD811900
- 1B3XC4639LD753443
- 1B3XC463XLD730348
- 1B3XC46K0LD746534
- 1B3XC46K0LD781395
- 1B3XC46R0LD839972
- 1B3XC46R6LD852046
- 1B3XC46R6LD890389
- 1B3XC4630LD730326
- 1B3XC46K6LD756758
- 1B3XC4633LD709275
- 1B3XC46R9LD883842
- 1B3XC46R5LD827123
- 1B3XC46R0LD889013
- 1B3XC4631LD732358
- 1B3XC46R7LD886805
- 1B3XC46R4LD845578
- 1B3XC46R6LD846134
- 1B3XC46R6LD874662
- 1B3XC46R0LD857937
- 1B3XC4639LD818629
- 1B3XC46RXLD880061
- 1B3XC4635LD741533
- 1B3XC4637LD726810
- 1B3XC463XLD744573
- 1B3XC46K3LD738878
- 1B3XC46R0LD867044
- 1B3XC4636LD787551
Safety & Recalls
Recall 91V004000 started on /Date(686376000000-0400)/.
Summary: WATER LEAKING UNDER WINDSHIELD COWL IN AREA ABOVE HEATER BLOWER MOTOR RESISTOR BLOCK RESULTS IN CORROSION OF THE RESISTOR TERMINALS.
Consequence: CORROSION OF THE RESISTOR TERMINALS INCREASES ELECTRICALRESISTANCE, LEADING TO OVERHEATING AND POSSBLE IGNITION OF THE WIRING CONNECTORSAND INSULATION, CAUSING A FIRE IN THE COWL AREA.
Remedy: THE BLOWER MOTOR RESISTOR BLOCK WILL BE REPLACED, AND A MASTIC PATCH APPLIED TO SEAL THE COWL AGAINST WATER ENTRY. DAMAGED WIRE CONNECTORS WILL BE REPLACED.
Recall 89V237000 started on /Date(630738000000-0500)/.
Summary: THE ENGINE VALVE COVER GASKET MAY DISLOCATE AND ALLOW AN ENGINE OIL LEAK AT THE GASKET.
Consequence: THE LEAKAGE OF OIL IN THE ENGINE COMPARTMENT COULD CAUSEA FIRE.
Remedy: REPLACE GASKET COVER WITH REVISED COVER, AND RTV SEALANT WILL BE APPLIED IN PLACE OF A GASKET.
Recall 90V080000 started on /Date(641016000000-0400)/.
Summary: AIR BAG INFLATOR MODULES MAY NOT CONTAIN DIFFUSER HOLES BETWEEN THE IGNITOR AND PROPELLANT CHAMBERS.
Consequence: AIR BAGS WOULD NOT DEPLOY IN AN IMPACT SITUATION, WHICH COULD LEAD TO DRIVER INJURY.
Remedy: REPLACE AIR BAG INFLATOR MODULES WITH PROPERLY MACHINED MODULES.
Recall 91V191000 started on /Date(688971600000-0500)/.
Summary: THE ANTI-LOCK BRAKE SYSTEM HIGH PRESSURE HOSE MAY LEAK OR DETACH AT ITS CRIMPED END FITTING RESULTING IN THE DISCHARGE OF HYDRAULIC FLUID.
Consequence: FLUID DISCHARGE EVENTUALLY CAUSES THE LOSS OF BOTH THEANTI-LOCK BRAKE SYSTEM AND HYDRAULIC ASSIST FOR THE BRAKE SYSTEM, RESULTING ININCREASED LIKELIHOOD OF BRAKE LOCKUP AND INCREASED STOPPING DISTANCES, WHICHCOULD RESULT IN A VEHICLE ACCIDENT.
Remedy: REPLACE THE ABS HIGH PRESSURE HOSE WITH A HOSE OF DIFFERENT DESIGN AND CONSTRUCTION.
Recall 96V099000 started on /Date(834638400000-0400)/.
Summary: THE ABS HYDRAULIC CONTROL UNIT CAN EXPERIENCE EXCESSIVE BRAKE ACTUATOR PISTON SEAL WEAR CAUSING PUMP-MOTOR DETERIORATION.
Consequence: IF THIS CONDITION OCCURS, THE ABS FUNCTION COULD BE LOST AND REDUCED POWER ASSIST WOULD BE EXPERIENCED DURING VEHICLE BRAKING INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy: DEALERS WILL TEST THE VEHICLE'S ANTI-LOCK BRAKE SYSTEM AND REPAIR THE VEHICLES IF NECESSARY. ALSO THE WARRANTY ON ALL ABS COMPONENTS WILL BE EXTENDED TO 10 YEARS OR 100,000 MILES (EXCEPT FOR THE BRAKE ACTUATOR PISTON ASSEMBLY AND THE PUMP-MOTOR ASSEMBLY WHICH WILL HAVE A LIFETIME COVERAGE). OWNERS WILL ALSO BE REIMBURSED FOR PREVIOUS ABS COMPONENT REPAIR COSTS.