1992 GMC Suburban Review

Recall 01I006000 started on /Date(994046400000-0400)/.

Summary: THIS IS NOT A SAFETY RECALL IN ACCORDANCE WITH THE SAFETY ACT. HOWEVER, IT IS DEEMED A SAFETY IMPROVEMENT CAMPAIGN BY THE AGENCY. VEHICLE DESCRIPTION: 1992-1994 CHEVROLET AND GMC SUBURBANS EQUIPPED WITH VACUUM POWER-BRAKE ASSIST AND EBC4 ANTI-LOCK BRAKE (ABS) MODULES. THESE VEHICLES EXHIBIT POOR BRAKE SYSTEM PERFORMANCE.

Consequence: THIS COULD BE ATTRIBUTED TO BRAKE PEDAL FEEL.

Remedy: DEALERS WILL INSTALL A NEW BRAKE PEDAL PAD. IN ADDITION, DEALERS WILL INSPECT THE BRAKE-BOOSTER OUTPUT ROD AND REPLACE IT IF NECESSARY.

Recall 06E043000 started on /Date(1148011200000-0400)/.

Summary: CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

Consequence: THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

Remedy: HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).

Recall 93V016000 started on /Date(728542800000-0500)/.

Summary: UNANTICIPATED HEAT IN THE TRANSMISSION CAN FORCE THE TRANSMISSION FLUID OUT OF THE VENT TUBE.

Consequence: THE VENTED TRANSMISSION FLUID CAN CATCH FIRE IF EXPOSEDTO A SOURCE OF IGNITION.

Remedy: INSTALL A LONGER TRANSMISSION VENT HOSE ROUTED TO THE LEFT SIDE OF THE ENGINE COMPARTMENT OF THE VEHICLE.

Recall 92V056000 started on /Date(703224000000-0400)/.

Summary: THE PIVOT BOLT HOLDING THE BRAKE PEDAL TO ITS SUPPORT BRACKET MAY BE IMPROPERLY TIGHTENED AND MAY NOT HAVE ENGAGED THE LOCKING MATERIAL ON THE BOLT. THE BOLT CAN DISENGAGE FROM THE NUT.

Consequence: IF THE PIVOT BOLT DISENGAGES FROM THE NUT WHILE THEVEHICLE IS IN MOTION, THERE WILL BE A LOSS OF BRAKE CONTROL AND COULD RESULT INA VEHICLE ACCIDENT.

Remedy: DEALERS SHOULD INSPECT THE HAND STARTED BRAKE PEDAL BOLTS AND TORQUE THEM TO SPECIFICATION.