1995 Buick Regal Review
1995 Buick Regal is a Coupe 2-dr style car measuring 193.90 in length and 53.30 in height. Made in Canada, 1995 Buick Regal has 4 trims priced by the manufacturer at 20,852 with just total of 8 recalls in the past 1995 Buick Regal. It’s seating 6 people with 4 doors and a rank size of 17.10 gallon. The engine is 3.8L V6 OHV 12V and uses 19 of gasoline in the city and 19 on highways.
Vin Numbers
- 2G4WF52L0S1424195
- 2G4WF52L0S1438629
- 2G4WF52L0S1441885
- 2G4WF52L1S1422570
- 2G4WF52L1S1468111
- 2G4WF52L8S1497864
- 2G4WF52LXS1415956
- 2G4WF52L5S1416979
- 2G4WF52L0S1421989
- 2G4WF52L6S1446623
- 2G4WF52L0S1459237
- 2G4WF52L9S1466025
- 2G4WF52L2S1472572
- 2G4WF52L7S1485592
Safety & Recalls
Recall 00V171000 started on /Date(962596800000-0400)/.
Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES. CORROSION OF THE AIR BAG INFLATOR'S INTERNAL WIRING, WHICH CAN OCCUR OVER TIME, COULD CAUSE THE INADVERTENT DEPLOYMENT OF THE DRIVER'S AIR BAG. THIS DEPLOYMENT COULD OCCUR DURING VEHICLE START-UP, WHILE THE VEHICLE IS PARKED OR IDLING, OR WHILE IN OPERATION.
Consequence: IF THE CONSUMER IS TOO CLOSE TO AN INFLATING AIR BAG, SERIOUS INJURIES COULD OCCUR.
Remedy: DEALERS WILL REPLACE THE INFLATORS ON THESE AIR BAGS.
Recall 94V229000 started on /Date(785394000000-0500)/.
Summary: THE VEHICLES WERE ASSEMBLED WITH AN INCORRECT FRONT PARK/TURN SIGNAL BULB WHICH DOES NOT HAVE SUFFICIENT CANDLE POWER. THIS DOES NOT COMPLY WITH FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Consequence: CONSEQUENCE OF NON-COMPLIANCE: OPERATORS COULD FAIL TO NOTICE AND HEED THE WARNING LABELS. REDUCES CANDLE POWER ON THE PARK/TURN LIGHTS DECREASES THE LIKLIHOOD OF VEHICLE OPERATOR'S INTENT BEING SEEN BY OTHER MOTORISTS.
Remedy: DEALERS WILL REPLACE THE INCORRECT BULB WITH THE CORRECT BULB.
Recall 95V030000 started on /Date(793861200000-0500)/.
Summary: THE FOUR (4) STEERING COLUMN SUPPORT BRACKET ATTACHING BOLTS WERE UNDER TORQUED DURING ASSEMBLY.
Consequence: INADEQUATE TORQUE CAN CAUSE THESE BOLTS TO VIBRATE, LOOSEN, OR FALL OUT RESULTING IN LOSS OF STEERING CONTROL AND INCREASE THE POTENTIAL FOR A VEHICLE CRASH.
Remedy: DEALERS WILL RETORQUE THE STEERING COLUMN SUPPORT BRACKET ATTACHING BOLTS TO THE CORRECT SPECIFICATIONS.
Recall 95V061000 started on /Date(795848400000-0500)/.
Summary: THE REAR WHEEL BRAKE HOSE(S) CAN CONTACT THE REAR SUSPENSION COMPONENTS CAUSING THE BRAKE HOSE(S) TO WEAR THROUGH.
Consequence: THIS CONDITION CAN CAUSE LOSS OF BRAKE FLUID AND EVENTUAL LOSS OF THE VEHICLE BRAKING SYSTEM INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy: DEALERS WILL INSPECT FOR PROPER BRAKE HOSE POSITION AND REPLACE THOSE HOSES IN AN INCORRECT POSITION WITH NEW HOSES AND CORRECTLY ROUTED.
Recall 95V152000 started on /Date(807854400000-0400)/.
Summary: INCORRECT CLEAR FRONT SIDE MARKER BULBS WERE INSTALLED RATHER THAN AMBER BULBS. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Consequence: CONSEQUENCE OF NON-COMPLIANCE: DURING ILLUMINATION, THE BULBS WILL SHOW CLEAR RATHER THAN AMBER AND COULD MOMENTARILY CONFUSE OTHER DRIVERS.
Remedy: DEALERS WILL REPLACE THE CLEAR BULBS WITH THE CORRECT AMBER BULBS.
Recall 97V017000 started on /Date(855637200000-0500)/.
Summary: SOME OF THESE VEHICLES HAVE A STRAINED OR SEPARATED WASHER/WIPER SWITCH POWER FEED WIRE.
Consequence: THIS CAN CAUSE THE WINDSHIELD WASHER/WIPER TO WORK INTERMITTENTLY AND COULD ULTIMATELY RESULT IN INOPERATIVE WIPERS. IF THIS WERE TO OCCUR IN A SEVERE WEATHER SITUATION, DRIVER VISIBILITY COULD BE REDUCED, INCREASING THE RISK OF A VEHICLE CRASH.
Remedy: DEALERS WILL INSPECT AND REPLACE THE OLD DESIGNED WASHER/WIPER SWITCHES WITH A NEWLY DESIGNED SWITCH.
Recall 97V065000 started on /Date(861336000000-0400)/.
Summary: THE CENTER REAR SEAT BELT ANCHOR PLATE EXHIBITS STRESS CRACKS.
Consequence: IN THE EVENT OF A VEHICLE CRASH, THE SEAT BELT SYSTEM CAN FRACTURE AND INJURY TO THE SEAT OCCUPANT CAN OCCUR.
Remedy: DEALERS WILL REPLACE THE CENTER REAR SEAT BELT SYSTEM.
Recall 98V306000 started on /Date(912488400000-0500)/.
Summary: THE CENTER REAR SEAT BELT ANCHOR PLATE EXHIBITS STRESS CRACKS.
Consequence: IN THE EVENT OF A VEHICLE CRASH, THE SEAT BELT SYSTEM CAN FRACTURE, INCREASING THE RISK OF INJURY TO THE SEAT OCCUPANT.
Remedy: DEALERS WILL REPLACE THE CENTER REAR SEAT BELT SYSTEM.