1995 Buick Roadmaster Review
1995 Buick Roadmaster is a Sedan 4-dr style car measuring 215.80 in length and 55.90 in height. Made in United States, 1995 Buick Roadmaster has 2 trims priced by the manufacturer at 24,390 with just total of 5 recalls in the past 1995 Buick Roadmaster. It’s seating 6 people with 4 doors and a rank size of 23.00 gallon. The engine is 5.7L V8 OHV 16V and uses 17 of gasoline in the city and 17 on highways.
Vin Numbers
- 1G4BN52P0SR400698
- 1G4BN52P0SR402399
- 1G4BN52P0SR413001
- 1G4BN52P0SR423303
- 1G4BN52P0SR428453
- 1G4BN52P1SR405733
- 1G4BN52P1SR409197
- 1G4BN52P1SR411807
- 1G4BN52P1SR414934
- 1G4BN52P1SR424704
- 1G4BN52P1SR429997
- 1G4BN52P2SR422427
- 1G4BN52P2SR427093
- 1G4BN52P2SR429250
- 1G4BN52P3SR413509
- 1G4BN52P3SR415597
- 1G4BN52P3SR420976
- 1G4BN52P3SR421982
- 1G4BN52P3SR429421
- 1G4BN52P4SR405290
- 1G4BN52P4SR408464
- 1G4BN52P4SR412479
- 1G4BN52P4SR415494
- 1G4BN52P4SR419495
- 1G4BN52P4SR420159
- 1G4BN52P4SR422543
- 1G4BN52P5SR405119
- 1G4BN52P5SR410403
- 1G4BN52P5SR410997
- 1G4BN52P5SR429985
- 1G4BN52P5SR430327
- 1G4BN52P6SR402035
- 1G4BN52P6SR403427
- 1G4BN52P6SR409292
- 1G4BN52P6SR411768
- 1G4BN52P6SR422298
- 1G4BN52P6SR423192
- 1G4BN52P7SR403789
- 1G4BN52P8SR419354
- 1G4BN52P8SR423744
- 1G4BN52P9SR402353
- 1G4BN52P9SR422456
- 1G4BN52P9SR422621
- 1G4BN52P9SR424238
- 1G4BN52P9SR430279
- 1G4BN52PXSR400871
- 1G4BN52PXSR401678
- 1G4BN52PXSR414382
- 1G4BN52PXSR419744
- 1G4BN52PXSR419906
- 1G4BN52PXSR403950
- 1G4BN52P0SR403021
- 1G4BN52P1SR422631
- 1G4BN52P9SR413823
- 1G4BN52P9SR412610
- 1G4BN52P3SR402543
- 1G4BN52P1SR424461
- 1G4BN52P8SR414560
- 1G4BN52P2SR423089
- 1G4BN52P5SR401636
- 1G4BN52P0SR411443
- 1G4BN52P0SR410051
Safety & Recalls
Recall 95V082000 started on /Date(798696000000-0400)/.
Summary: THESE VEHICLES FAIL TO CONFORM TO FMVSS NO. 124, "ACCELERATOR CONTROL SYSTEMS." AT LOW TEMPERATURES, EXCESSIVE FRICTION CAN OCCUR IN THE ACCELERATOR PEDAL ASSEMBLY.
Consequence: CONSEQUENCE OF NON-COMPLIANCE: IN THE EVENT OF A FAILURE OF THE TROTTLE RETURN SPRING, IF THERE IS EXCESSIVE FRICTION IN THE PEDAL ASSEMBLY, THE ENGINE SPEED MAY NOT RETURN TO IDLE INCREASING THE POTENTIAL FOR A VEHICLE CRASH.
Remedy: DEALERS WILL REPLACE THE ACCELERATOR PEDAL ASSEMBLY.
Recall 96V019000 started on /Date(822978000000-0500)/.
Summary: DEFECTIVE LOWER CONTROL ARM BALL JOINT ATTACHMENT NUTS WERE NOT PROPERLY TORQUED AND CAN LOOSEN.
Consequence: IF THE LOWER CONTROL ARM BALL JOINT LOOSENS, FATIGUES AND SEPARATES FROM THE FRONT SUSPENSION KNUCKLE, IT COULD CAUSE LOSS OF VEHICLE CONTROL.
Remedy: DEALERS WILL INSPECT BOTH FRONT LOWER CONTROL ARM BALL JOINT ATTACHMENT NUTS FOR PROPER TORQUE. IF THE BALL JOINT HAS LOOSENED FROM THE KNUCKLE, BOTH THE BALL JOINT AND THE KNUCKLE WILL BE REPLACED.
Recall 95V215000 started on /Date(815374800000-0500)/.
Summary: THESE VEHICLES WERE SHIPPED WITH BOTH THE SUPPLEMENTAL INFLATABLE RESTRAINT CAUTION LABEL AND A ROOF RACK CAUTION LABEL INSTALLED ON THE SAME SIDE OF THE SUN VISOR. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO.208, "OCCUPANT CRASH PROTECTION."
Consequence: CONSEQUENCE OF NON-COMPLIANCE: OPERATORS COULD FAIL TO NOTICE AND HEED THE WARNING LABELS.
Remedy: A NEW ROOF RACK CAUTION LABEL, WITH INSTALLATION INSTRUCTIONS, WILL BE SENT DIRECTLY TO OWNERS. OWNERS WILL INSTALL THE LABEL OR HAVE THEIR DEALER INSTALL THE LABEL FOR THEM.
Recall 95V221000 started on /Date(816498000000-0500)/.
Summary: THESE VEHICLES WERE PRODUCED WITH AN IMPROPERLY ADJUSTED TRANSMISSION SHIFT CONTROL LINKAGE. THIS DOES NOT MEET WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION."
Consequence: CONSEQUENCE OF NON-COMPLIANCE: IT MAY BE POSSIBLE TO SHIFT FROM THE "PARK" POSITION WITH THE IGNITION KEY REMOVED INCREASING THE RISK OF A VEHICLE ACCIDENT RESULTING FROM THE UNINTENDED MOVEMENT OF A PARKED VEHICLE.
Remedy: DEALERS WILL ADJUST THE SHIFT CONTROL LINKAGE SYSTEM.
Recall 96V245000 started on /Date(850194000000-0500)/.
Summary: THE WHEEL LUG NUTS WERE NOT TIGHTENED TO THE PROPER SPECIFICATION DURING ASSEMBLY.
Consequence: THIS CONDITION COULD RESULT IN A FRACTURE OF THE WHEEL STUDS CAUSING THE WHEEL TO SEPARATE FROM THE VEHICLE.
Remedy: DEALERS WILL TIGHTEN THE VEHICLE'S WHEEL LUG NUTS TO THE PROPER SPECIFICATION.