1995 Ferrari F355 Review

Recall 09V447000 started on /Date(1258606800000-0500)/.

Summary: FERRARI IS RECALLING CERTAIN MODEL YEAR 1995 THROUGH 1999 FERRARI 355 AND 355 F1 VEHICLES. INDEPENDENT AUTOMOBILE REPAIR FACILITIES MAY HAVE IMPROPERLY INSTALLED CERTAIN SCREW CLAMPS THAT ARE LOCATED IN CLOSE PROXIMITY TO THE FUEL LINES AND THAT FASTEN THE WATER SLEEVE TO THE THERMOSTAT CONNECTION. THE IMPROPER INSTALLATION OF THESE SCREW CLAMPS MAY DAMAGE THE FUEL SUPPLY PIPES.

Consequence: FLUID COULD LEAK INTO THE ENGINE COMPARTMENT, CAUSING SMOKE AND, IN SOME CIRCUMSTANCES, A FIRE, RENDERING THE VEHICLE INOPERABLE AND POSSIBLY RESULTING IN A CRASH.

Remedy: DEALERS WILL INSTALL A NEW FUEL DIVIDER BLOCK, WHICH WILL SERVE TO PROVIDE A GREATER DISTANCE BETWEEN THESE SCREW CLAMPS AND THE FUEL LINES. THIS WILL ELIMINATE THE POSSIBILITY OF ANY DAMAGE TO THE FUEL SUPPLY PIPES WHICH COULD CAUSE FLUID LEAKAGE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 16, 2009. OWNERS MAY CONTACT FERRARI AT 1-201-816-2600.

Recall 96V013000 started on /Date(821854800000-0500)/.

Summary: DEFECTIVE LEFT STEERING RACK MOUNTING SUPPORTS WERE IMPROPERLY HEAT TREATED RESULTING IN THE POSSIBLE FRACTURING OF THE SUPPORT.

Consequence: IF THE STEERING RACK FRACTURES, LOSS OF VEHICLE CONTROL CAN OCCUR INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.

Remedy: DEALERS WILL REPLACE THE LEFT STEERING RACK MOUNTING SUPPORT WITH A NEW SUPPORT WHICH HAS BEEN PROPERLY HEAT TREATED.

Recall 96V207000 started on /Date(845611200000-0400)/.

Summary: THE PASSENGER SIDE SEAT BELT MECHANISM WHICH IS FITTED WITH THE CHILD SAFETY SEAT LOCKING MECHANISM WAS FITTED ON THE DRIVER SIDE AND THE DRIVER'S SIDE SEAT BELT MECHANISM WITHOUT THE LOCKING MECHANISM FITTED ON THE PASSENGER SIDE.

Consequence: THE SEAT BELT MECHANISM (WITHOUT THE LOCKING DEVICE) MAY NOT LOCK FAST ENOUGH AND COULD ALLOW EXCESSIVE MOVEMENT OF THE CHILD SAFETY SEAT IN THE EVENT OF AN ACCIDENT.

Remedy: DEALERS WILL INSPECT THE SEAT BELT MECHANISMS TO DETERMINE WHETHER THEY HAVE BEEN INSTALLED ON THE PROPER SIDE OF THE VEHICLE AND, IF NECESSARY, DISMOUNT AND REMOUNT THE MECHANISMS ON THE CORRECT SIDE.

Recall 98V057000 started on /Date(890024400000-0500)/.

Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES FITTED WITH SINGLE FUEL PUMPS. THE FUEL INJECTION LINE FITTING CAN FRACTURE IF THE ALUMINUM NUT ATTACHING THE LINES IS TIGHTENED EXCESSIVELY.

Consequence: IF THE FUEL LINE FRACTURES, FUEL LEAKAGE CAN OCCUR. IF AN IGNITION SOURCE IS PRESENT, A FIRE COULD OCCUR.

Remedy: DEALERS WILL REMOVE THE FUEL INJECTION LINES THAT HAVE ALUMINUM NUTS AND REPLACE WITH NEW LINES CONTAINING STEEL ATTACHING NUTS.

Recall 98V088000 started on /Date(893649600000-0400)/.

Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES FITTED WITH DUAL FUEL PUMPS. THE FUEL INJECTION LINE FITTING CAN FRACTURE IF THE ALUMINUM NUT ATTACHING THE LINES IS TIGHTENED EXCESSIVELY.

Consequence: IF THE FUEL LINE FRACTURES, FUEL LEAKAGE CAN OCCUR. IF AN IGNITION SOURCE IS PRESENT, A FIRE COULD OCCUR.

Remedy: DEALERS WILL REMOVE THE FUEL INJECTION LINES THAT HAVE ALUMINUM NUTS AND REPLACE WITH NEW LINES CONTAINING STEEL ATTACHING NUTS.

Recall 97V163000 started on /Date(874900800000-0400)/.

Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH DUAL FUEL PUMPS. THE FUEL SUPPLY LINE FITTING CAN FRACTURE IF THE ALUMINUM NUT ATTTACHING THE LINES IS TIGHTENED EXCESSIVELY. HAIRLINE CRACKS ON THE FUEL INJECTOR RAIL ALSO EXISTS.

Consequence: THIS CONDITION CAN RESULT IN LEAKAGE OF FUEL FROM THE FRACTURED LINE. IF AN IGNITION SOURCE WAS PRESENT, A FIRE COULD OCCUR.

Remedy: DEALERS WILL REMOVE THE FUEL FUEL INJECTION LINES AND TWO RAILS THAT US ALUMINUM NUTS AND REPLACE THE LINES AND RAILS WITH STEEL NUTS.