2000 Subaru Legacy Review
2000 Subaru Legacy is a Sedan 4-dr style car measuring 184.40 in length and 55.70 in height. Made in United States, 2000 Subaru Legacy has 3 trims priced by the manufacturer at 22,095 with just total of 4 recalls in the past 2000 Subaru Legacy. It’s seating 5 people with doors and a rank size of 16.90 gallon. The engine is 2.5L H4 SOHC 16V and uses 21 - 22 of gasoline in the city and 21 - 22 on highways.
Vin Numbers
- 4S3BE6351Y6200785
- 4S3BE6351Y7215636
- 4S3BE6352Y6207972
- 4S3BE6352Y7218254
- 4S3BE6353Y7204735
- 4S3BE6353Y7207554
- 4S3BE6353Y7210521
- 4S3BE6353Y7214990
- 4S3BE6353Y7217243
- 4S3BE6353Y7217498
- 4S3BE6355Y7206809
- 4S3BE6355Y7215154
- 4S3BE6355Y7218376
- 4S3BE6356Y6201964
- 4S3BE6356Y6216965
- 4S3BE6356Y7213848
- 4S3BE6359Y7211429
- 4S3BE635XY6204978
- 4S3BE635XY7217210
- 4S3BE6350Y7216633
- 4S3BE6357Y7211462
- 4S3BE6355Y7212187
- 4S3BE6351Y7208105
- 4S3BE6454Y7210218
- 4S3BE6454Y7212308
- 4S3BE6455Y6211805
- 4S3BE6452Y7201419
- 4S3BE6458Y7201764
- 4S3BE6450Y7202536
- 4S3BE6459Y7208173
- 4S3BE6563Y6209980
- 4S3BE6566Y7218036
- 4S3BE6569Y6215010
- 4S3BE6569Y7205491
- 4S3BE6569Y7209525
- 4S3BE656XY6212620
- 4S3BE656XY7206066
- 4S3BE6567Y7216666
- 4S3BE656XY7211929
- 4S3BE656XY6208468
Safety and Reliability
NHTSA Crash Test
* National Highway Traffic Safety AdministrationIIHS Crash Test
* Insurance Institute for Highway SafetySafety & Recalls
Recall 00V091000 started on /Date(953874000000-0500)/.
Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LEFT-SIDE STEERING KNUCKLE ARM WAS INCORRECTLY ASSEMBLED.
Consequence: THIS CONDITION COULD RESULT IN A LOSS OF STEERING CONTROL.
Remedy: DEALERS WILL INSPECT THE TORQUE ON THE LEFT SIDE TIE-ROD END CASTLE NUT AND INSTALL A NEW COTTER PIN.
Recall 03V153000 started on /Date(1050984000000-0400)/.
Summary: THIS RECALL APPLIES TO CERTAIN PASSENGER VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. CERTAIN REAR SUSPENSION SUBFRAME COMPONENTS WERE PRODUCED WITH POOR PAINT QUALITY WHICH, AFTER CONTINUED EXPOSURE TO CORROSIVE ROAD SALTS FOR A PERIOD OF SEVERAL YEARS, COULD RESULT IN RUST-OUT OF THE COMPONENT AND POSSIBLE BREAKAGE OF THE SUBFRAME.
Consequence: IF SUCH BREAKAGE OCCURS WHILE THE VEHICLE IS BEING OPERATED, CONTROL OF THE VEHICLE COULD BE AFFECTED, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL CLEAN AND RUST-PROOF THE REAR SUSPENSION SUBFRAME. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SUBARU AT 1-800-782-2783.
Recall 13E065000 started on /Date(1385701200000-0500)/.
Summary: Airtex Products LP (Airtex) is recalling certain model E8598M, E8518M, E8600M, E8596M, and E8597M fuel pumps manufactured July 26, 2013, and July 29, 2013 and used as aftermarket replacements on Subaru Baja's, Outback's and Legacy's. The affected fuel pumps were sold or installed into the aftermarket applications on or after July 26, 2013, and may may leak fuel from the base of a fuel line connection when the gas tank is full.
Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Airtex will notify owners, and will replace the fuel pump, free of charge. Recall is expected to begin on January 2, 2014. Customers may contact Airtex at 1-800-880-3056. The recall is expected to begin during January 2014. This recall is being conducted by Airtex, not by Subaru.
Recall 99V249000 started on /Date(937540800000-0400)/.
Summary: VEHICLE DESCRIPTION: SEDAN L MODEL PASSENGER VEHICLES. ANTI-RUST COATING WAS INCORRECTLY APPLIED TO THE TRANSVERSE LINK MOUNTING SURFACE OF THE VEHICLE BODY. OVER TIME THE COATING SHRINKS, CAUSING A TORQUE DECREASE OF THE BOLT THAT SECURES THE TRANSVERSE LINK BRACKET TO THE VEHICLE BODY.
Consequence: THIS CAN RESULT IN LOOSENING OF THE BRACKET AND SUBSEQUENT SEPARATION OF THE TRANSVERSE LINK FROM THE VEHICLE FRAME.
Remedy: DEALERS WILL INSPECT THE VEHICLES AND, IF NECESSARY, REMOVE THE ANTI-RUST COATING UNDER THE MOUNTING LOCATION OF THE LEFT TRANSVERVE LINK MOUNTING BRACKET BOLT AND RETORQUE THE MOUNTING BOLT TO THE REQUIRED TORQUE.