2005 Ford F-250 SD Review
2005 Ford F-250 SD is a Regular Cab Pickup 2-dr style car measuring 226.60 in length and 76.50 in height. Made in United States, 2005 Ford F-250 SD has 19 trims priced by the manufacturer at 34,820 with just total of 5 recalls in the past 2005 Ford F-250 SD. It’s seating 3 people with 4 doors and a rank size of 29.00 gallon. The engine is 6.0L V8 OHV 32V TURBO DIESEL .
Vin Numbers
- 1FTSW21P15EC22667
Safety & Recalls
Recall 05V266000 started on /Date(1118289600000-0400)/.
Summary: ON CERTAIN PICKUP TRUCKS AND CHASSIS CAB VEHICLES EQUIPPED WITH 5.4L OR 6.8L GASOLINE ENGINES, THE FUEL JUMPER LINE MAY HAVE AN INCORRECT END FORM.
Consequence: THE FUEL LINE MAY SEPARATE AT THE CONNECTION TO THE MAIN FUEL BUNDLE. IF THE FUEL LINE SEPARATES, AN OPERATOR MAY NOTICE A GASOLINE ODOR AND/OR FUEL ON THE GROUND, LOSS OF POWER, AND THE ENGINE WILL EVENTUALLY STALL. FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE COULD RESULT IN A FIRE.
Remedy: DEALERS WILL INSTALL AN EXTERNAL RETENTION CLIP AT THE FUEL JUMPER LINE TO THE MAIN FUEL BUNDLE CONNECTION. THE RECALL BEGAN ON JUNE 20, 2005. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Recall 05V270000 started on /Date(1118376000000-0400)/.
Summary: CERTAIN PICKUP TRUCKS, SPORT UTILITY VEHICLES AND VANS EQUIPPED WITH 6.0L DIESEL ENGINES MAY EXPERIENCE STALLING WITHOUT WARNING WHILE DRIVING AND MAY OR MAY NOT RESTART.
Consequence: SHOULD THE ENGINE STALL, A VEHICLE CRASH COULD OCCUR.
Remedy: DEALERS WILL UPGRADE THE FUEL INJECTION CONTROL MODULE (FICM) WIRE HARNESS OR REPLACED, AND/OR HAVE A NEW INJECTION CONTROL PRESSURE (ICP)) SENSOR CONNECTOR INSTALLED FREE OF CHARGE. THE RECALL BEGAN ON JULY 22, 2005. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Recall 08E026000 started on /Date(1206590400000-0400)/.
Summary: TRUXXX IS RECALLING 338 AFTERMARKET REPLACEMENT WELDED 3" LIFT BLOCKS FOR REAR SUSPENSIONS, PART NO. 206073, INCLUDED IN SUSPENSION KIT NOS. 108035 AND 108036, SOLD BETWEEN JULY 26, 2007 AND MARCH 4, 2008, FOR USE ON FORD MY 2005-2008 F-250 SUPERDUTY 4X4 LIGHT TRUCKS. COMPRESSIVE FORCES OF THE WELDED LIFT BLOCKS RESULTING FROM FORESEEABLE AND EXCESS VEHICLE PAYLOADS AS WELL AS OVER-TIGHTENING OF THE U-BOLTS DURING INSTALLATION MAY DISTORT THE BLOCKS, REDUCING THE INTENDED CLAMPING FORCE OF THE U-BOLTS.
Consequence: THIS COULD ALLOW POSSIBLE SHIFTING AND DAMAGE TO THE REAR DRIVE SHAFT AND AXLE.
Remedy: TRUXXX WILL NOTIFY CUSTOMERS/INSTALLERS AND WILL REPLACE AFFECTED WELDED LIFT BLOCKS WITH EITHER NON-WELDED ALUMINUM OR CAST IRON BLOCKS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN ON OR ABOUT APRIL 16, 2008. OWNERS MAY CONTACT TRUXXX AT 1-800-381-8320.
Recall 11V352000 started on /Date(1310529600000-0400)/.
Summary: FORD IS RECALLING CERTAIN MODEL YEAR 2011 RANGER TRUCKS BUILT FROM JANUARY 25, 2011, THROUGH APRIL 25, 2011 AT THE TWIN CITIES ASSEMBLY PLANT, AND SERVICE PARTS DISTRIBUTED TO DEALERS FOR CERTAIN 2004 THROUGH 2011 MODEL YEAR RANGER TRUCKS, 2002 THROUGH 2005 MODEL YEAR EXCURSION VEHICLES, AND 2002 THROUGH 2007 MODEL YEAR F-250, F-350, F-450, AND F-550 TRUCKS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE MULTI-FUNCTION SWITCH WAS SHIPPED WITH A SUBCOMPONENT (SLIDER) THAT MAY EXPERIENCE DEFORMATION. A MULTI-FUNCTION SWITCH WITH A DEFORMED SLIDER MAY MALFUNCTION CAUSING THE TURN SIGNAL, TAIL LIGHTS, HAZARD WARNING SIGNAL FLASHERS AND/OR BRAKE LIGHTS NOT TO ACTIVATE.
Consequence: NON-FUNCTIONING LIGHTS COULD INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE SWITCHES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 15, 2011. OWNERS MAY CONTACT FORD MOTOR COMPANY CUSTOMER RELATIONSHIP CENTER AT 1-866-436-7332.
Recall 20E090000 started on /Date(1607490000000-0500)/.
Summary: Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
Consequence: If the steering locks, it can increase the risk of a crash.
Remedy: Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.