1988 Mazda 626 Review

1988 Mazda 626 is a Sedan 4-dr style car measuring 179.30 in length and 55.50 in height. Made in Japan, 1988 Mazda 626 has 3 trims priced by the manufacturer at 10,999 with just total of 6 recalls in the past 1988 Mazda 626. It’s seating 5 people with 4 doors and a rank size of 15.90 gallon. The engine is 2.2L L4 SOHC 12V and uses 24 of gasoline in the city and 24 on highways.

Make: Mazda
Model: 626
Trims Available: 3
Location: JAPAN
Body & Doors: SEDAN 4-DR
Engine: 2.2L L4 SOHC 12V
Transmission: 4A | 5M
Driveline: FWD
Seats: 5
MSRP: $10,999 USD
MPG: 24 City / 31 HWY
Tires: 185/70SR14
Tank Size: 16 gallon

Mazda 626 1988 Trims

1988 Mazda 626 DX sedan

Engine: 2.2L L4 SOHC 12V
Transmission: 4A | 5M
Drivetrain: FWD
Body & Doors: SEDAN 4-DR
Seating: 5
MPG: 24 City / 31 HWY

1988 Mazda 626 LX Touring hatchback

Engine: 2.2L L4 SOHC 12V
Transmission: 4A | 5M
Drivetrain: FWD
Body & Doors: HATCHBACK 4-DR
Seating: 4
MPG: 24 City / 31 HWY

1988 Mazda 626 LX sedan

Engine: 2.2L L4 SOHC 12V
Transmission: 4A | 5M
Drivetrain: FWD
Body & Doors: SEDAN 4-DR
Seating: 5
MPG: 24 City / 31 HWY

Vin Numbers

  • JM1GD2226J1561859
  • JM1GD2225J1555034
  • JM1GD2222J1594714
  • JM1GD2222J1583454
  • JM1GD2223J1563794
  • JM1GD2227J1541913
  • JM1GD2220J1596512
  • JM1GD2221J1533791
  • JM1GD222XJ1592936
  • JM1GD2220J1510602
  • JM1GD2228J1587962
  • JM1GD2224J1558488
  • JM1GD2227J1514324
  • JM1GD222XJ1547141
  • JM1GD2227J1515831
  • JM1GD2229J1586531
  • JM1GD2220J1570024
  • JM1GD2228J1585984

Safety & Recalls

Recall 88V022000 started on /Date(572504400000-0500)/.

Summary: AT AMBIENT TEMPERATURES BELOW 0 DEGREE F, FROST MAY ACCUMULATE WITHIN THE THROTTLE BODY UNDER EXTENDED CONSTANT SPEED OPERATION.

Consequence: FROST ACCUMULATION ON THE THROTTLE VALVE MAY PREVENT THEVALVE FROM RETURNING SMOOTHLY.

Remedy: INSTALL A NEW TYPE THERMOSTAT DESIGNED TO RAISE THE COOLANT TEMPERATURE AND WARM THE THROTTLE BODY TO A LEVEL ABOVE FREEZING.

Recall 87V186000 started on /Date(565851600000-0500)/.

Summary: FUEL TANK FIXING BAND RETENTION IS NOT SUFFICIENT, ALLOWING THE BAND TO RUB AGAINST THE FUEL TANK BY VEHICLE VIBRATIONS.

Consequence: THIS COULD WEAR A HOLE IN THE FUEL TANK WHICH COULDRESULT IN FUEL LEAKAGE.

Remedy: REPAIR FUEL FIXING BAND BY INSTALLING A RUBBER SHEET.

Recall 87V149000 started on /Date(558849600000-0400)/.

Summary: FLOOR MAT COULD INTERFERE WITH RELEASE OF ACCELERATOR PEDAL DUE TO IMPROPER SHAPE OF MAT.

Consequence: THIS COULD RESULT IN LOSS OF ACCELERATOR CONTROL ANDCREATE POTENTIAL FOR AN ACCIDENT.

Remedy: REMOVE PRESENT MAT AND REPLACE WITH NEW IMPROVED MAT.

Recall 88V063000 started on /Date(576993600000-0400)/.

Summary: THE DRIVE SPRING THAT DRIVES THE AUTOMATIC BELT MAY BREAK.

Consequence: THIS WOULD PREVENT FULL FORWARD MOVEMENT OF THE SEAT BELTANCHORAGE FROM THE LOCK POSITION WHEN THE DOOR IS OPENED.

Remedy: REPLACE AUTOMATIC SHOULDER BELT.

Recall 87V196000 started on /Date(567752400000-0500)/.

Summary: VEHICLES EQUIPPED WITH REAR BRAKE DRUMS TRANSPORTED BY TRAIN MAY EXPERIENCE SEPARATION OF THE BRAKE SHOE FROM THE WHEEL BRAKE CYLINDER PISTON.

Consequence: SHOULD SEPARATION OCCUR, REPEATED BRAKE OPERATION MAYDAMAGE THE WHEEL BRAKE CYLINDER DUST BOOT, ALLOWING WATER OR DUST INTRUSION ANDSUBSEQUENT PISTON CONTAMINATION.

Remedy: ALL VEHICLES WILL BE INSPECTED AND IF NO SEPARATION IS FOUND GREASE WILL BE APPLIED TO THE COMPONENT INTERFACE TO LOWER FRICTION AND AVOID SUBSEQUENT RELATIVE MOTION. IF SEPARATION IS FOUND THE WHEEL BRAKE CYLINDER DUST BOOT WILL BE REPLACED.

Recall 93V174000 started on /Date(751867200000-0400)/.

Summary: RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.

Consequence: INADVERTENT ACTUATION OF THE DOOR LATCH CAUSES THE DOORTO OPEN UNEXPECTEDLY WHICH COULD RESULT IN AN OCCUPANT FALLING OUT OF THEVEHICLE.

Remedy: DEALERS WILL REPLACE THE DOOR HANDLE/LATCH ASSEMBLY.

FAQ

Vinlookup has no data to assist you in this question.

If you consider used 1988 Mazda 626 look at maintenance fees and average fuel economy compared to similar models. 1988 Mazda 626’s uses 1 gallon of fuel for 24 miles, which is lower then 1987 Mazda 626.

1988 Mazda 626 is made in Japan between 1981 to 2002.

1988 Mazda 626 can go 381.6 miles in the city and 492.9 on the highways.

With various efficient powertrains, one of the benefits of the 1988 Mazda 626 is its excellent fuel economy. 1988 Mazda 626 has a 2.2L L4 SOHC 12V engine and It gets 24/31 mpg city/highway.

Mazda All models of 1988

Mazda 323

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda 323 Wagon

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda 626

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda 929

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda B-Series

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda MX-6

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Mazda RX-7

$10,999 - $13,099
24 City / 31 HWY
3 Trims
5
0
2.2L L4 SOHC 12V

Browse by year

2002 Mazda 626

2001 Mazda 626

2000 Mazda 626

1999 Mazda 626

1998 Mazda 626

1997 Mazda 626

1996 Mazda 626

1995 Mazda 626

1994 Mazda 626

1993 Mazda 626

1992 Mazda 626

1991 Mazda 626

1990 Mazda 626

1989 Mazda 626

1987 Mazda 626

1986 Mazda 626

1985 Mazda 626

1984 Mazda 626

1983 Mazda 626

1982 Mazda 626

1981 Mazda 626