1990 GMC Safari Review
1990 GMC Safari is a Sports Van style car measuring 176.80 in length and 74.10 in height. Made in United States, 1990 GMC Safari has 7 trims priced by the manufacturer at 12,277 with just total of 4 recalls in the past 1990 GMC Safari. It’s seating 5 people with doors and a rank size of 27.00 gallon. The engine is 4.3L V6 OHV 12V and uses 17 of gasoline in the city and 17 on highways.
Vin Numbers
- 1GTDM15Z1LB501085
- 1GTDM15Z1LB536533
- 1GTDM15ZXLB503384
Safety & Recalls
Recall 91V164000 started on /Date(685339200000-0400)/.
Summary: SEAT BELT ANCHORAGE BAR FOR REAR SOFA FAILED TO SUSTAIN LOADS REQUIRED BY FMVSS 210.
Consequence: VEHICLES WOULD NOT COMPLY WITH FMVSS 210.
Remedy: REPLACE NONCOMPLYING SOFA BAR WITH BAR THAT MEETS REQUIREMENTS.
Recall 90V146000 started on /Date(650520000000-0400)/.
Summary: FUEL RETURN HOSES MAY BREAK AT EITHER CRIMPED COUPLING, CAUSING A LEAKAGE OF FUEL.
Consequence: IN THE EVENT OF A FUEL RETURN LINE SEPARATION, A FUELLEAK OCCURRING IN THE PRESENCE OF AN IGNITION SOURCE COULD CAUSE A FIRE.
Remedy: INSTALL A PROPERLY CRIMPED FUEL RETURN HOSE.
Recall 93V119000 started on /Date(744264000000-0400)/.
Summary: SEVERE CORROSION DUE TO ROAD SALT AT THE JOINT OF THE STAMPED STEEL CENTER SECTION AND THE CAST OUTER SECTION CAN CAUSE THE SECTIONS TO SEPARATE.
Consequence: SEPARATION OF THE ROTOR SECTIONS CAN CAUSE LOSS OFBRAKING ABILITY IN THE AFFECTED WHEEL. THIS COULD RESULT IN INCREASED STOPPINGDISTANCE AND/OR LOSS OF VEHICLE CONTROL AND AN ACCIDENT.
Remedy: REPLACE THE FRONT BRAKE ROTORS WITH NEW ROTORS WITH A CORROSION PROTECTION COATING. HOWEVER, IF REPLACEMENT OF BRAKE LININGS ARE NECESSARY, IT WILL BE DONE AT OWNER'S EXPENSE SINCE BRAKE LININGS ARE NORMAL MAINTENANCE ITEMS.
Recall 93V187000 started on /Date(753426000000-0500)/.
Summary: THE RECLINER MECHANISM AND THE SEAT FRAME MAY HAVE FOAM AND/OR VINYL BETWEEN THEM, CREATING A "SOFT" JOINT. THIS "SOFT" JOINT RESULTS IN LOWER THAN SPECIFIED BOLT TORQUE WHICH LEADS TO JOINT LOOSENESS, CAUSING BOLT FATIGUE AND EVENTUAL BOLT FAILURE.
Consequence: IF BOLT FAILURE OCCURS TO THE DRIVER'S SEAT, IT WOULDALLOW THE SEAT BACK TO SUDDENLY RECLINE, AND COULD RESULT IN LOSS OF VEHICLECONTROL AND A VEHICLE CRASH WITHOUT PRIOR WARNING.
Remedy: DEALERS WILL REMOVE THE FOAM AND/OR VINYL FROM BETWEEN THE RECLINER MECHANISM AND THE SEAT FRAME "SOFT" JOINT AND REPLACE THE RECLINER BOLTS.