1990 Honda Prelude Review
1990 Honda Prelude is a Coupe 2-dr style car measuring 177.60 in length and 51.00 in height. Made in Japan, 1990 Honda Prelude has 3 trims priced by the manufacturer at 15,285 with just total of 1 recalls in the past 1990 Honda Prelude. It’s seating 4 people with doors and a rank size of 15.90 gallon. The engine is 2.0L L4 DOHC 16V and uses 23 of gasoline in the city and 23 on highways.
Honda Prelude 1990 Trims
1990 Honda Prelude 2.0 Si
1990 Honda Prelude Si
1990 Honda Prelude 2.0 S
Vin Numbers
- JHMBA4133LC002039
- JHMBA4231LC023342
- JHMBA4223LC001589
- JHMBA4120LC007612
- JHMBA4154LC023760
- JHMBA4230LC015216
- JHMBA4232LC025987
- JHMBA4153LC028173
- JHMBA4120LC004824
- JHMBA412XLC024918
- JHMBA4133LC020279
- JHMBA413XLC005505
- JHMBA4239LC009561
- JHMBA4225LC017597
- JHMBA4137LC001556
- JHMBA4138LC020617
- JHMBA4137LC008670
- JHMBA4230LC011523
- JHMBA4138LC027065
- JHMBA425XLC006783
- JHMBA4149LC025186
- JHMBA4155LC028837
- JHMBA414XLC019235
- JHMBA4135LC012104
- JHMBA4126LC025922
- JHMBA4130LC013841
- JHMBA4153LC028755
- JHMBA4220LC022111
- JHMBA4132LC028356
- JHMBA4239LC026912
- JHMBA4132LC001335
- JHMBA4148LC020075
- JHMBA4127LC009079
- JHMBA4134LC008609
- JHMBA4231LC029173
- JHMBA4133LC022064
- JHMBA413XLC012132
- JHMBA4221LC022733
- JHMBA4246LC025581
- JHMBA413XLC020263
- JHMBA4145LC025816
- JHMBA413XLC008307
- JHMBA412XLC802800
- JHMBA4211LC012615
- JHMBA4212LC017726
- JHMBA4110LC000442
- JHMBA4116LC011140
- JHMBA4113LC001889
- JHMBA4219LC027105
- JHMBA4118LC024200
- JHMBA4210LC028594
- JHMBA4218LC014474
Safety & Recalls
Recall 95V103001 started on /Date(801288000000-0400)/.
Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES. CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. CHECK THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUG ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, THEN PRESS THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS ANY SIGN OF BREAKAGE OR CRACKING, OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, PROMPTLY CONTACT YOUR AUTHORIZED HONDA/ACURA DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT THE FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
FAQ
Honda All models of 1990
Honda Accord
Honda Civic
Honda Civic Wagon
