1991 Honda Prelude Review

Main Specs Gallery Trims Vin Numbers Recalls Faq

Value Range $15,195 - $17,445

Seats 4

Miles per Gallon 23 City / 27 HWY

Crash Testing true

# Trims 2 Trims

1991 Honda Prelude is a Coupe 2-dr style car measuring 177.60 in length and 49.20 in height. Made in Japan, 1991 Honda Prelude has 2 trims priced by the manufacturer at 16,320 with just total of 1 recalls in the past 1991 Honda Prelude. It’s seating 4 people with doors and a rank size of 15.90 gallon. The engine is 2.0L L4 DOHC 16V and uses 23 of gasoline in the city and 23 on highways.

Exterior Photos

Interior Photos

Honda Prelude 1991 Trims

1991 Honda Prelude 2.0 Si

Engine: 2.0L L4 DOHC 16V

Transmission: 5M

Drivetrain: FWD

Body & Doors: COUPE 2-DR

Seating: 4

MPG: 23 City / 27 HWY

1991 Honda Prelude Si

Engine: 2.1L L4 DOHC 16V

Transmission: 5M

Drivetrain: FWD

Body & Doors: COUPE 2-DR

Seating: 4

MPG: 22 City / 26 HWY

Vin Numbers

JHMBA4131MC025921
JHMBA4131MC029208
JHMBA4126MC002593
JHMBA4220MC004029
JHMBA4254MC012659
JHMBA4127MC021394
JHMBA4157MC021664
JHMBA4132MC027015
JHMBA4121MC027076
JHMBA4125MC010071
JHMBA4134MC009051
JHMBA4136MC025364
JHMBA4137MC000991
JHMBA4152MC003203
JHMBA4156MC024944
JHMBA4237MC029390
JHMBA4257MC007410
JHMBA4251MC001988
JHMBA4131MC012425
JHMBA415XMC016622
JHMBA4158MC008180
JHMBA4136MC012307
JHMBA4157MC015802
JHMBA4220MC000191
JHMBA4257MC001400
JHMBA4158MC011192
JHMBA4133MC008215
JHMBA4124MC009817
JHMBA4238MC024604
JHMBA4220MC005343
JHMBA4130MC006924
JHMBA4126MC028367
JHMBA4255MC006434
JHMBA4232MC018040
JHMBA4134MC016520
JHMBA4254MC012905
JHMBA4226MC016234
JHMBA423XMC024605
JHMBA4226MC018887
JHMBA4236MC004612
JHMBA412XMC018537
JHMBA4134MC004707
JHMBA4154MC015126
JHMBA4231MC011127
JHMBA4239MC008573
JHMBA4156MC025205
JHMBA422XMC017029
JHMBA4234MC003054
JHMBA4237MC004134
JHMBA4121MC028597
JHMBA4157MC010583
JHMBA4137MC014244

Safety & Recalls

Recall 95V103001 started on /Date(801288000000-0400)/.

Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES. CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. CHECK THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUG ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, THEN PRESS THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS ANY SIGN OF BREAKAGE OR CRACKING, OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, PROMPTLY CONTACT YOUR AUTHORIZED HONDA/ACURA DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT THE FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.