1997 Plymouth Prowler Review

Recall 03V034000 started on /Date(1044421200000-0500)/.

Summary: ON CERTAIN PASSENGER VEHICLES, THE LOWER CONTROL ARM BALL JOINTS MAY EXPERIENCE A LOSS OF LUBRICATION THAT CAN RESULT IN ACCELERATED WEAR AND POSSIBLE SEPARATION FROM THE STEERING KNUCKLE.

Consequence: A BALL JOINT THAT HAS SEPARATED MAY RESULT IN LOSS OF DIRECTIONAL CONTROL.

Remedy: DEALERS WILL REPLACE THE FRONT LOWER CONTROL ARM BALL JOINTS WITH MODIFIED ASSEMBLIES. OWNER NOTIFICATION BEGAN ON APRIL 4, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403 OR CHECK ON-LINE AT HTTP://WWW.CHRYSLER.COM/WEBSELFSERVICE/CHRYSLER/INDEX.JSP

Recall 06E022000 started on /Date(1142226000000-0500)/.

Summary: CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.

Consequence: LOSS OF BRAKE FLUID CAN LEAD TO A DECREASE IN BRAKE LINE PRESSURE AND AN INCREASE IN STOPPING DISTANCE, WHICH CAN RESULT IN A VEHICLE CRASH.

Remedy: AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.

Recall 06E088000 started on /Date(1161576000000-0400)/.

Summary: CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.

Consequence: FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.

Remedy: TI AUTOMOTIVE WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 6, 2006. OWNERS MAY CONTACT TI AUTOMOTIVE TOLL-FREE AT 1-877-461-1834.

Recall 98V047000 started on /Date(889678800000-0500)/.

Summary: VEHICLE DESCRIPTION: MULTI-PURPOSE PASSENGER VEHICLE. SOME OF THE FRAME WELDS THAT AFFECT VEHICLE CONTROL AND CRASHWORTHINESS WERE OMITTED IN SIX ZONES IN THE FRAME.

Consequence: LOSS OF VEHICLE CONTROL CAN OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.

Remedy: DEALERS WILL INSPECT THESE VEHICLES FOR THE PRESENCE OF THE CRITICAL WELDS. ANY VEHICLES MISSING WELDS WILL BE CORRECTED BY TEAMS OF WELDERS IN THE FIELD.

Recall 98V184000 started on /Date(902376000000-0400)/.

Summary: VEHICLE DESCRIPTION: PASSENGER VEHICLES BUILT WITH 3.5L ENGINES. THE FUEL INJECTION DELIVERY SYSTEM CAN LEAK FUEL FROM SOME OF THE SEALING O-RINGS OR FROM HAIR LINE CRACKS IN THE THERMOSET FUEL INJECTION RAIL.

Consequence: FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.

Remedy: DEALERS WILL REPLACE THE FUEL RAIL O-RINGS AND REINFORCE THE OUTLET (PASSENGER) SIDE FUEL RAIL. VEHICLES SHOWING FUEL LEAKAGE ON THE OUTLET FUEL RAIL MUST HAVE THE OUTLET RAIL REPLACED WHICH INCLUDES CHANGING THE UPPER AND LOWER INJECTOR O-RINGS. HOWEVER, IF A VEHICLE IS LEAKING FUEL FROM THE O-RINGS OR FROM A CRACKED FUEL LINE, THE VEHICLE SHOULD BE TAKEN INTO A DEALER TO HAVE THIS REPAIRED AS SOON AS POSSIBLE.