1987 Honda Prelude Review

1987 Honda Prelude is a Coupe 2-dr style car .Made in Japan, 1987 Honda Prelude has 2 trims priced by the manufacturer at 0 with just total of 2 recalls in the past 1987 Honda Prelude. It’s seating No data people with 2 doors and a rank size of No data gallon. The engine is 1.8L L4 DOHC 16V .

Make: Honda
Model: Prelude
Trims Available: 2
Location: JAPAN
Body & Doors: COUPE 2-DR
Engine: 1.8L L4 DOHC 16V
Driveline: FWD
Tires: No data

Honda Prelude 1987 Trims

1987 Honda Prelude 2.0 Si/S

Engine: 2.0L L4 DOHC 16V
Drivetrain: FWD
Body & Doors: COUPE 2-DR

1987 Honda Prelude 1800

Engine: 1.8L L4 DOHC 16V
Drivetrain: FWD
Body & Doors: COUPE 2-DR

Vin Numbers

  • JHMBA6121HC003247
  • JHMBA6128HC009269
  • JHMBA6129HC008471
  • JHMBA6222HC010531
  • JHMBA6221HC000850

Safety & Recalls

Recall 92V028001 started on /Date(734846400000-0400)/.

Summary: IF THE PLASTIC COATING OF THE FUEL FILLER AND/OR BREATHER PIPE IS DAMAGED, SALT WATER MAY ACCUMULATE BETWEEN THE PLASTIC COATING AND THE STEEL PIPES, AND THE ACCUMULATION COULD CAUSE CORROSION WHICH WOULD EVENTUALLY RUST THROUGH THE AFFECTED PIPES, ALLOWING GASOLINE FUMES AND FUEL TO LEAK.

Consequence: GASOLINE FUMES AND/OR FUEL LEAKAGE THROUGH THE FILLER ORBREATHER PIPES COULD RESULT IN A FIRE WHEN EXPOSED TO A SOURCE OF IGNITION.

Remedy: REPAIRS WILL BE MADE TO VEHICLES WITH CORRODED FILLER OR BREATHER PIPES.

Recall 95V103001 started on /Date(801288000000-0400)/.

Summary: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES. CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. CHECK THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUG ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, THEN PRESS THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS ANY SIGN OF BREAKAGE OR CRACKING, OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, PROMPTLY CONTACT YOUR AUTHORIZED HONDA/ACURA DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT THE FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.

FAQ

Vinlookup has no data to assist you in this question.

Vinlookup has no data to assist you in this question.

1987 Honda Prelude is made in Japan between 1981 to 2001.

Vinlookup has no data to assist you in this question.

Vinlookup has no data to assist you in this question.

Honda All models of 1987

Honda Accord

2 Trims
0
2.0L L4 DOHC 16V

Honda Civic

2 Trims
0
2.0L L4 DOHC 16V

Honda Prelude

2 Trims
0
2.0L L4 DOHC 16V

Browse by year

2001 Honda Prelude

2000 Honda Prelude

1999 Honda Prelude

1998 Honda Prelude

1997 Honda Prelude

1996 Honda Prelude

1995 Honda Prelude

1994 Honda Prelude

1993 Honda Prelude

1992 Honda Prelude

1991 Honda Prelude

1990 Honda Prelude

1989 Honda Prelude

1988 Honda Prelude

1986 Honda Prelude

1985 Honda Prelude

1984 Honda Prelude

1983 Honda Prelude

1982 Honda Prelude

1981 Honda Prelude